Changing the System Administrator Password
Xerox recommends that you change the default system administrator password after you configure
the printer. Be sure to store the password in a secure location. The default password is 1111.
1. In Xerox
®
CentreWare
®
Internet Services, click Properties.
2. Click Maintenance→Administrator Password.
3. Type the password, then type the password again to verify.
4. To save the new password, for Select to save a new password, select the check box.
5. Click Save.
18
Xerox
®
B1025 Multifunction Printer
System Administrator Guide
Initial Setup
To Next Page
Loading...
