IP Filtering
You can prevent unauthorized network access by creating an IP Filter to block or allow data sent from
particular IP addresses.
Note: Be careful not to filter the IP address of any device used to administer the printer.
EEnnaabblliinngg IIPP FFiilltteerriinngg
1. In Xerox
®
CentreWare
®
Internet Services, click Properties→Security.
2. Click IP Filtering.
3. To enable IP filtering, select IPv4 Filtering Enabled, IPv6 Filtering Enabled, or both.
4. To permit access to the device, type the IP Address and Port or Prefix as needed.
5. Click Apply.
Xerox
®
B1025 Multifunction Printer
System Administrator Guide
49
Security
To Next Page
Loading...
