Note: You can change these settings at any time.
For details, refer to the User Guide for your printer.
SSeettttiinngg AAllttiittuuddee AAddjjuussttmmeenntt
Atmospheric pressure, determined by altitude, can affect print quality. If the printer is at an elevation
greater than 1000 m (3280 ft.), to improve print quality, you can use Altitude Adjustment.
To set Altitude Adjustment:
1. At the control panel, press the Machine Status button.
2. Touch Device Settings→General→Altitude Adjustment.
3. Select an option:
• Normal: Select this option for altitudes below 1000 m (3280 ft.).
• High 1: Select this option for altitudes from 4000–5000 m (13123–16404 ft).
• High 2: Select this option for altitudes from 3000–4000 m (9842–13123 ft).
• High 3: Select this option for altitudes from 2000–3000 m (6561–9842 ft).
• High 4: Select this option for altitudes from 1000–2000 m (3280–6561 ft).
4. Touch OK.
Xerox
®
B1025 Multifunction Printer
System Administrator Guide
15
Initial Setup
To Next Page
Loading...
