Xerox DocuMate 3115 User Manual

Xerox
®
DocuMate
®
3115
User’s Guide
107
Still Image Client
If you want to specify an application to use for scanning at the start of the process, you can use event
forwarding.
Supported file formats—you cannot select a file format when scanning to the Still Image Client as the
destination application is not selected until after you start scanning.
Destination type—the Still Image Client destination is classified as an “Event Forward Link”. To make it
available in the destination list, you must select STI event forwarding on the Options tab in the
OneTouch Properties Window.
Please note that if you have turned on the option to scan to multiple destinations, the Still Image
Client destination cannot be selected. Please click on the Options tab and deselect Enable scanning to
multiple destinations to proceed with scanning to this destination.
1. Open the OneTouch Properties window, and select
Still Image Client as the Destination
Application.
2. Choose a Scan Configuration and click
OK.
3. Start scanning using the button you selected for event forwarding.

Xerox DocuMate 3115 Specifications

General

Film scanning	No
Color scanning	-
Duplex scanning	Yes
Input color depth	- bit
Maximum scan size	- mm
Output color depth	24 bit
ADF scan speed (b/w, A4)	15 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (b/w, A4)	30 ipm
Scanner type	ADF scanner
Product color	Black, Grey
Scan drivers	TWAIN, WIA
Daily duty cycle (max)	500 pages
Maximum scan area (ADF)	216 x 356 mm
ISO A-series sizes (A0...A9)	A4
USB version	2.0
Standard interfaces	USB 2.0
Power supply type	AC
Mac operating systems supported	Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	86 mm
Width	298 mm
Height	71 mm
Weight	1600 g