Xerox
®
DocuMate
®
3115
User’s Guide
186
Hardware Properties and Interface Behavior
You can use the scanner’s properties page to keep track of scanner maintenance, change some of the
hardware options, configure the scanner interface behavior, and adjust application options that may
be available for your scanner.
To open the scanner hardware properties page:
• Windows 7 and 8—from the Windows Control Panel, open Hardware and Sound and then Devices
and Printers
.
Right-click on the scanner and then select
Scan properties from the list. Click Yes if you are
prompted by the Windows User Account Control to confirm that you want make changes to the
system settings.
•
Windows Vista—from the Windows Control Panel, open Hardware and Sound and then Scanners
and Cameras
.
Click on the scanner icon then click on the
Properties button. Click Yes if you are prompted by the
Windows User Account Control to confirm that you want make changes to the system settings.
•
Windows XP—from the Windows Control Panel when in category view, open Printers and Other
Hardware
and then Scanners and Cameras.
Right-click on the scanner and then select
Properties from the list.
Device Settings
Scanner Details
• Firmware version—this is the current hardware processor chip version number.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
