Xerox DocuMate 3115 User Manual

Xerox
®
DocuMate
®
3115
User’s Guide
56
Scan from the OneTouch Button Panel
Scanning from the button panel on your computer’s screen works like pressing a button on the scanner.
The scanner scans the item, then sends the image to the Destination Application indicated by the
button’s icon.
To scan from the OneTouch Button panel:
1. Load the documents into the scanner.
2. Click on the OneTouch icon in the Windows notification area (at the lower right corner of the
screen.)
3. The OneTouch Button Panel opens.
4. Click the button you want to use to scan.
5. The scanner starts scanning and the image is sent to the selected destination for the OneTouch
button you are using to scan.
Features of the OneTouch Button Panel
The OneTouch panel is your on-screen set of controls for the scanner. From the panel you can access
the hardware settings for your scanner and configure the Scan button.
OneTouch Icon

Xerox DocuMate 3115 Specifications

General

Film scanning	No
Color scanning	-
Duplex scanning	Yes
Input color depth	- bit
Maximum scan size	- mm
Output color depth	24 bit
ADF scan speed (b/w, A4)	15 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (b/w, A4)	30 ipm
Scanner type	ADF scanner
Product color	Black, Grey
Scan drivers	TWAIN, WIA
Daily duty cycle (max)	500 pages
Maximum scan area (ADF)	216 x 356 mm
ISO A-series sizes (A0...A9)	A4
USB version	2.0
Standard interfaces	USB 2.0
Power supply type	AC
Mac operating systems supported	Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	86 mm
Width	298 mm
Height	71 mm
Weight	1600 g