Xerox
®
DocuMate
®
3115
User’s Guide
147
Using the Preview Window
Clicking the Preview button will display the preview window for the scanner interface. Use the preview
option if you want to scan and display a sample image that reflects the current settings in the main
interface. After the preview is displayed, you can then adjust the settings in the main interface until
you are happy with how the sample image looks. The preview window is also where you can define
custom scan regions. Please refer to Scan Regions for instructions on creating and scanning custom
regions.
To use the preview window:
1. Select the initial scan settings you want to use for the preview image and scanning.
If you want to modify the settings for a particular preset, make sure you select that preset before
continuing.
2. Click the
Preview button to open the preview window.
If there is a page in the scanner, the scanner will scan and display a sample image in the preview
window. If you do not have a page in the scanner when you click Preview, the preview window will
open and display an empty scan area. You will need to place a page in the scanner and click Get
preview to scan and display a sample image.
3. The preview window displays the scan area and the current scan region. This scan region reflects
the paper size currently selected in the main interface. When you pass the mouse cursor over the
scan region it will highlight for you to move or resize it. If you move, resize, or add scan regions the
main interface will display
User defined for the page size. Please refer to Scan Regions for
instructions on creating, resizing and deleting regions.
Click the zoom in or zoom out button to zoom in or out on the preview image in 15% steps. Click
the up or down arrows for the Zoom level box to zoom in or out on the preview image in 5% steps.
Click the zoom to fit button to fit the entire preview area within the preview window.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
