Xerox
®
DocuMate
®
3115
User’s Guide
156
• Multi-stream—select this option to have the scanner create an image of each item scanned in
each color mode selected in the source list.
•
Duplex—select this option to scan both sides of the item in the scanner. Note that if you deselect
the Back side options in the source configuration list, this option will automatically deselect.
Click the drop down menu to select the scanning options you want to use.
The available color modes are:
• Automatic determines the color of the document as it is being scanned.
•
Color scans the document in color, creating a full color copy of an original document or
photograph. Color scans have the largest file size.
•
Gray scans the document using varying shades of gray to reproduce the document. The grayscale
scan mode is often used when scanning documents or graphics where the original color does not
need to be retained, but the graphics need to be legible. Grayscale scanning preserves the graphic
quality while keeping the file size less than that of a full color scan.
•
Black and White scans the document in bitonal where everything on the page is either black or
white. This setting is often used when scanning typed or written documents. When there are not a
lot of graphics, or if the graphics are not needed, this setting is ideal for archiving documents to a
server or on a disc, send through email, or posting to a web page, as the file size is smaller than the
other scanning modes.
Sources identical
If the scanner has multiple paper source options, select this option to have the settings you choose in
the interface apply to all paper sources in the scanner. For instance, if you select color scanning when
scanning from the input tray, then the flatbed or front feed tray scans will also be in color.
(Example: Sources are identical) (Example: Sources are different)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
