Xerox
®
DocuMate
®
3115
User’s Guide
121
Scanning with Job Separation
Use job separation to have OneTouch create a new file each time a separator is detected when
scanning a multiple page batch. For example, if you want to scan financial statements from several
different banks, you can place a stack of statements in the scanner and OneTouch will separate each
statement into a different file based on your selected job separator.
1. Open the OneTouch Properties window.
2. Select the Destination Application, File Format, and Scan Configuration applicable to your
scanning batch.
Make sure the option
Create single image files is not selected. If this option is selected, the job
separation features on the
Options tab will be disabled.
3. Click on the
Options tab in the OneTouch Properties window.
4. Click on the down arrow next to the
Select Button list to select the button you want to modify.
Note that the options in this window are specific to each OneTouch button.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
