Xerox
®
DocuMate
®
3115
User’s Guide
79
Transfer to Storage
With Transfer to Storage, you can scan documents and save them in a folder in one step.
Supported file types—since the files are saved directly to a folder on the computer or server, all file
formats in OneTouch are available. Note that text file formats are only available if an OCR module or
application is installed. Please refer to Text Formats on page 74 to see a list of text file formats that are
available when OCR is installed.
Destination type—the Transfer to Storage destination is classified as a “Storage Link”. To make it
available in the destination list, you must select
Storage and CD-R/W on the Options tab in the
OneTouch Properties window.
Setting the Folder and Options from OneTouch
In the OneTouch Properties window, select Transfer to Storage as the Destination Application for
scanning.
•Click the
Properties button to open the OneTouch Link Properties for Transfer to Storage. From this
window, you can change the global default storage location and options.
On initial installation of OneTouch, all scan configurations use these settings. When you create
new configurations, the default settings will also match what you have selected here. If you
modify the storage options in an individual configuration, changing the options in this Link
Properties window will no longer update to the configurations you modified.
To Next Page
Need help?
General
Weight and Dimensions
