Xerox DocuMate 3115 User Manual

Xerox
®
DocuMate
®
3115
User’s Guide
38
Connect the USB Cable and Turn on the Power
1. Remove any tape from the USB cable.
2. Plug the USB cable into the USB port on the scanner then into a USB port on the computer. Check
your computer’s manual for USB port locations.
If the plug does not attach easily, make sure that you are plugging it in correctly. Do not force the
plug into either connection.
3. Turn on the scanner power.
The status light comes on and flashes indicating that the scanner is receiving power.
Your computer recognizes that a scanner has been plugged into the USB port and automatically
loads the appropriate software to run the scanner.

Xerox DocuMate 3115 Specifications

General

Film scanning	No
Color scanning	-
Duplex scanning	Yes
Input color depth	- bit
Maximum scan size	- mm
Output color depth	24 bit
ADF scan speed (b/w, A4)	15 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (b/w, A4)	30 ipm
Scanner type	ADF scanner
Product color	Black, Grey
Scan drivers	TWAIN, WIA
Daily duty cycle (max)	500 pages
Maximum scan area (ADF)	216 x 356 mm
ISO A-series sizes (A0...A9)	A4
USB version	2.0
Standard interfaces	USB 2.0
Power supply type	AC
Mac operating systems supported	Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	86 mm
Width	298 mm
Height	71 mm
Weight	1600 g