Xerox DocuMate 3115 User Manual

Xerox
®
DocuMate
®
3115
User’s Guide
67
Advanced Settings Tab
Use the Advanced Settings tab to set color correction options for Color or Grayscale scanning. Drag the sliders
to the left and right to change the color settings. As you do, the image changes to show the effects of
the new settings.
•
Color saturation—the strength or purity of a color. This option is only available when the selected
scan mode is Color.
•
Color hue—the color your eyes see as reflected from the image. This option is only available when
the selected scan mode is Color.
•
Gamma—is the tone curve and the starting point for image enhancement. As you raise or lower
the Gamma value, the values at which saturation, hue, brightness and contrast affect the image
are changed. It is recommended that you keep the default Gamma value or adjust this setting
before adjusting the other options. This option is available for both Color and Grayscale scanning.
Redaction Settings Tab
Use the options on the Redaction Settings tab to remove a specified area in the scanned image.

Xerox DocuMate 3115 Specifications

General

Film scanning	No
Color scanning	-
Duplex scanning	Yes
Input color depth	- bit
Maximum scan size	- mm
Output color depth	24 bit
ADF scan speed (b/w, A4)	15 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (b/w, A4)	30 ipm
Scanner type	ADF scanner
Product color	Black, Grey
Scan drivers	TWAIN, WIA
Daily duty cycle (max)	500 pages
Maximum scan area (ADF)	216 x 356 mm
ISO A-series sizes (A0...A9)	A4
USB version	2.0
Standard interfaces	USB 2.0
Power supply type	AC
Mac operating systems supported	Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	86 mm
Width	298 mm
Height	71 mm
Weight	1600 g