5.2 Common Menus Setting 153
Image Log Transfer Sets transfer of image logs to the log server.
Log
Transfer
Set whether or not to enable the image log transfer feature.
• [Disabled] (default)
• [Enabled]
Logs To
Transfer
Sets automatic transfer of image logs.
•[Pause]
• [Per Job Basis]
• [Accumulate First] (default)
Note
• [Per Job Basis] is displayed when [Image Log Control] > [Assurance
Level] is set to [High].
Transfer
Timing
Sets the timing that image logs are transferred. Set [Disabled] for each
of the transfer timings. Default is all [Enabled].
• [At end of the job]
•[At power On]
• [End of selections]
• [When max reached]
Assurance
Level
Sets the assurance level when data is transferred to the log server.
• [Low] (default)
• [High]
Note
• When [High] is set, data is transferred unconditionally. However,
during data transfer, printer performance might drop or printing may
be paused.
Setting Description
To Next Page
Loading...
