Xerox DocuPrint C2255

160 5 Control Panel Settings
Setting Description
Plain, Recycled,
Bond, Plain S2,
1. Custom 1 to
5. Custom 5
Sets the image quality (paper type) for each paper.
• [A] ([Bond] default)
Quality ideal for color-exclusive bond paper such as J paper (82g/m
2
)
• [B] ([Plain], [Plain S2] defaults)
Quality ideal for generally used office paper (P paper, C2 paper, etc.)
• [C] ([Recycled] default)
Quality ideal for recycled paper (C2r paper, WR100 paper, etc.)
•[D]
Select this when print quality is uneven on coarse paper.
• [E] - [G]
Not used.
•[S]
Quality ideal for gloss paper is 105g/m
2
or less, such as JD coated
(104.7g/m
2
), J coated (95.0g/m
2
)
Note
• [5. Custom 5] are optimum conditions for gloss paper at 105g/m
2
or less,
such as JD coated (104.7g/m
2
) and J coated (95.0g/m
2
).
• “Coarse paper” refers to paper having conspicuous transparent characters
when held up against the light.
Heavyweight,
Heavyweight S2
Sets the image quality (paper type) for each paper.
• [A] (default)
•[B]
Quality ideal for water resistant paper.
•[C]
Quality ideal for white film.
•[S]
The quality can be set by the user.
ExtraHeavyweight,
X-Heavyweight S2
Sets the image quality (paper type) for each paper.
• [A] (default)
• [B], [C]
Quality ideal for business cards.
•[D]
Not used.
•[S]
Quality ideal for film labels or water resistant film gloss paper.