Image Quality
3-12 09/06 PHASER 3124 / PHASER 3125
IQ 10 Ghost (2)
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Description
Ghost occurs at 75.5 mm (2.97 inches) intervals on the print.
(When printing on card stock or transparencies using bypass tray)
Checks and Causes Solutions
1. When printing on transparencies
or card stock, higher transfer volt-
age is required.
1. Inform the customer to Select
'Thick Mode' from the paper type
menu using the software applica-
tion. It is advisable to return the
printer to original mode when fin-
ished.
To Next Page
Loading...
