Xerox Phaser 3124 - In the Manual Tray

General Procedures and Information
PHASER 3124 / PHASER 3125 09/06 6-31
If the paper does not move when you pull, or if you do not see the paper in this area, check the
fuser area around the toner cartridge, PL 1.
2. Open and close the front cover, PL 1 to resume printing the document from failed pages.
In the manual tray
1. Remove the jammed paper in the manual tray, PL 1 by gently pulling it straight out, Figure 5.
Figure 5
If the paper does not move when you pull, or if you do not see the paper in this area, check the
fuser area around the toner cartridge PL 1.
2. Open and close the front cover, PL 1 to resume printing the document from failed pages.