Xerox Phaser 6100 User Guide

U SING P APER OR S PECIALTY
2.9
2
Using the Multi-Purpose Tray (MPT)
The Multi-purpose Tray (MPT) is located on the right side of your
printer. It can be closed when you are not using it, making the
printer more compact.
The Multi-purpose Tray can hold several sizes and types of
paper, such as transparencies, cards and envelopes. You may
also want to use the Multi-purpose Tray for single page print jobs
on letterhead, colored paper for use as separator sheets, or
other specialty media that you do not normally keep in the paper
tray. You can load approximately 100 sheets of plain paper, 10
envelopes, 30 transparencies, 10 sheets of card stock or 10
labels at a time.
• Load only one size of paper at a time in the
Multi-purpose Tray.
• To prevent paper jams, do not add paper when there is still
paper in the Multi-purpose Tray. This also applies to other
types of specialty media.
• Paper should be loaded face down with the top edge going
into the Multi-purpose Tray first and be placed in the center of
the tray.
To load paper in the Multi-purpose Tray:
1 Lower the Multi-purpose Tray and unfold the paper support
extension as shown.
Multi-purpose Tray (MPT)

Xerox Phaser 6100 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	1200 x 600 DPI
Time to first page (black, normal)	15 s
Time to first page (color, normal)	24 s
Print speed (black, normal quality, A4/US Letter)	21 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	64 MB
Standard input trays	2
Compatible operating systems	MAC OS, NT4, OS X, Win2000, Win95/98, WinME, WinXP, Win 98se
Recommended operating temperature range (T-T)	15 - 32.5 °C
Media types supported	A-4
Page description languages	GDI
Total input capacity	350 sheets

Weight and Dimensions

Dimensions (WxDxH)	510 x 470 x 405 mm