U
SING
THE
C
ONTROL
P
ANEL
5.11
5
Maintenance Menu
Use the Maintenance menu to maintain the toner cartridges
and other consumables.
Item Explanation
Check Toner
Allows you to check how much toner is left in
the each toner cartridge.
Check Others
•
Imaging Unit
: allows you to check the
total number of images printed, since the
image counter was last set to zero. See
page 6.14.
•
Transfer Belt
: allows you to check the
total number of images printed, since the
image counter was last set to zero. See
page 6.22.
• Fuser, Transfer Roll:
allows you to
check the total number of pages printed
and reset the life count after the fuser or
transfer roller is replaced.
•
MPT Roller, Tray 1 Roller, Tray 2
Roller:
allows you to check the total
number of images fed from each tray.
Low Warning
This item determines how the printer
behaves when the consumables are low.
•
Off
: The printer does not display the
warning message.
•
On
:
The printer displays the warning
message.
Cleaning Page
Allows you to print a page that cleans the
fuser unit inside the printer.
Registration
Allows you print a color registration print
page.
Primary Color
Allows you to print a 4x4 color bar test print
page.
All Color Page
Allows you to print a primary and secondary
test print page.
Cyan Solid
Allows you to print a 100% Cyan fill test
page.
Magenta Solid
Allows you to print a 100% Magenta fill test
page.
Yellow Solid
Allows you to print a 100% Yellow fill test
page.