Xerox Phaser 6100

U SING P APER OR S PECIALTY
2.17
2
3 When you print, configure the tray selection to MPT, the
paper type to Labels and the paper size in the software
application. For details, see page 3.7.
Printing on Transparencies
• Do not use transparencies attached to plain paper.
• Only use Phaser 35-Series Premium Transparency Film with
the Phaser 6100 printer.
• Ensure that transparencies do not have torn edges and are
not wrinkled or curled.
• Hold the transparencies by the edges and avoid touching the
print side. Oils from your fingers can cause print quality
problems.
• Be careful not to leave fingerprints on or scratch the print
side.
CAUTION : To avoid damaging the printer, use only transparencies
recommended for laser printers using oil-less fusers. Do not use
transparencies with paper backing or paper tape. Use only Phaser
35-Series Premium Transparency Film.
NOTES :
• Transparencies print only in black and white.
• Before printing on transparencies,
make sure that the output support
is laid down.