Xerox Phaser 6100 User Guide

U SING THE C ONTROL P ANEL
5.6
Overview of Control Panel Menus
The control panel menus are used to configure the printer. The
control panel provides access to the following menus:
Information Menu
This menu contains information pages that you can print to give
details about the printer and its configuration.
Page Layout
(See page 5.7.)
Duplex
Duplex Margin
Color
(See page 5.8.)
Calibration
Custom Color
Information
(See page 5.6.)
Config Page
Menu Map
Demo Page
Connection Pg*
Maintenance
(See page 5.8.)
Check Toner
Check Others
Low Warning
Cleaning Page
Registration
Primary Color
All Color Page
Cyan Solid
Magenta Solid
Yellow Solid
Black Solid
Network Setup*
(See page 5.12.)
Configure TCP
Enable AppleTK
Reset Network
Reset Defaults
Printer Setup
(See page 5.9.)
Language
Pwr Save Time
Auto Continue
Jam Recovery
Altitude Adj.
Power Save
Reset Defaults
* This menu only appears on the
Phaser 6100DN printer.
Item Explanation
Config Page
The configuration page shows the
printer’s current configuration. See
page 6.2.
Menu Map
The menu map shows the layout and
current settings of the control panel menu
items.

Xerox Phaser 6100 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	1200 x 600 DPI
Time to first page (black, normal)	15 s
Time to first page (color, normal)	24 s
Print speed (black, normal quality, A4/US Letter)	21 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	64 MB
Standard input trays	2
Compatible operating systems	MAC OS, NT4, OS X, Win2000, Win95/98, WinME, WinXP, Win 98se
Recommended operating temperature range (T-T)	15 - 32.5 °C
Media types supported	A-4
Page description languages	GDI
Total input capacity	350 sheets

Weight and Dimensions

Dimensions (WxDxH)	510 x 470 x 405 mm