Xerox Phaser 6100

U SING P APER OR S PECIALTY
2.11
2
If you want to print on previously printed paper from the
Multi-purpose Tray, the printed side should be facing up
with the uncurled edge towards the printer. If you
experience problems with the paper feeding, turn the paper
around.
NOTE : Make sure that you have
not loaded too much paper.
The paper buckles if you load a
stack that is too deep or if you
push it in too far.
5 When you print a document, set the tray selection to MPT
and select the correct paper type in the software
application. For details, see page 3.7.
NOTE : After printing fold away the
paper support extension and close
the Multi-purpose Tray.