Xerox Phaser 6100 User Guide

U SING THE C ONTROL P ANEL
5.13
5
IP Source
The IP Source menu option provides three methods for setting
an IP address:
Static
The Static menu option provides three methods for manually
entering an IP address:
Item Explanation
BOOTP
• BOOTP : The BOOTP server allots the IP
address to you automatically.
DHCP
• DHCP: The DHCP server allots the IP
address to you automatically.
Static
• Static: You can enter IP address,
subnetmask, and gateway manually.
See the Static table for information on
manually entering an IP address.
Item Explanation
IP Address
This item lets you enter the IP address
manually.
• Press the scroll button to set the value of
the 1st byte between 1 and 255, and then
press the
OK button.
• Set the value for the 2nd to the 4th byte
the same way.
Subnet Mask
This item lets you enter the subnet mask
manually.
• Press the scroll button to set the value of
the 1st byte between 1 and 255, and then
press the
Enter button.
• Set the value for the 2nd to the 4th byte
the same way.
Gateway
This item lets you enter the gateway
manually.
• Press the scroll button to set the value of
the 1st byte between 1 and 255, and then
press the
Enter button.
•
Set the value for the 2nd to the 4th byte
the same way.

Xerox Phaser 6100 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	1200 x 600 DPI
Time to first page (black, normal)	15 s
Time to first page (color, normal)	24 s
Print speed (black, normal quality, A4/US Letter)	21 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	64 MB
Standard input trays	2
Compatible operating systems	MAC OS, NT4, OS X, Win2000, Win95/98, WinME, WinXP, Win 98se
Recommended operating temperature range (T-T)	15 - 32.5 °C
Media types supported	A-4
Page description languages	GDI
Total input capacity	350 sheets

Weight and Dimensions

Dimensions (WxDxH)	510 x 470 x 405 mm