Troubleshooting
Xerox
®
VersaLink
®
B405 Multifunction Printer 209
User Guide
Symptom Solutions
Spots or lines appear at regular
intervals on the prints.
1. Print the Repeating Defects pages.
At the control panel, touch Device > Support > Support Pages >
Repeating Defects.
2. To determine the cause, measure the distance between the print
defects.
• 28 mm (1.1 in.) - Drum Cartridge
• 53 mm (2.1 in.) - Drum Cartridge
• 94 mm (3.7 in.) - Drum Cartridge
• 49 mm (1.9 in.) - Transfer Roller
• 80 mm (3.1 in.) - Fuser
• 95 mm (3.7 in.) - Fuser
3. If the repeating defects matches the Drum Cartridge distances,
replace the Drum Cartridge.
4. If the distance matches the Fuser or Transfer Roller, call for service or
replace the Maintenance Kit.
To Next Page
Loading...
