Xerox WorkCentre 5325

Maintenance
WorkCentre 5300 Series Multifunction Printer
User Guide
162
3. Check the inside of the finisher for any loose staples and remove them.
4. Pinch both sides of the staple case (1) and remove the staple case from the cartridge (2).
5. Insert the front side of the new staple case into the staple cartridge (1), then push the rear side
into the cartridge (2).
6. Insert the staple cartridge into the finisher.
7. Close the finisher front cover.
wc53xx-046
1
1
2
wc53xx-047
1
2
wc53xx 048
wc53xx-049