Installation and Setup
WorkCentre 5300 Series Multifunction Printer
User Guide
39
Turning Main Power On
Main printer power is controlled by the main power switch. Main power should be left on for normal
printer operation and should only be turned off when connecting a cable to the printer or when
cleaning the printer.
CAUTIONS:
• To avoid damaging the printer’s internal hard drive or causing a printer malfunction, switch
main power on first using the main power switch.
• Do not switch main power off immediately after switching it on. Doing so may damage the
printer’s internal hard drive or cause a printer malfunction.
1. Open the front cover.
2. Press the main power switch to the on position.
To Next Page
Loading...
