Xerox WorkCentre 5945 User Manual

Getting Started WorkCentre
®
5945/5955
User Guide 33
Power On and Off
Powering the Device On
1. Ensure that your device is connected to a suitable power supply and that the power cord is fully
plugged in to the electrical inlet of the device.
2. Press the Power button. The entire powering on process (to power on all installed options) takes
less than 3 minutes 50 seconds.
Note: If there are any pages in the document feeder input tray when the device powers on or
exits power save mode you will be prompted to reload the documents.
Powering the Device Off
Power Off ends the current session and turns off the device.
1. Press the Power button on the control panel.
2. Select the Power Off button on the touch screen.
3. Select the Power Off button again to confirm that the device should power off.
Note: Confirming power off will result in the deletion of any jobs currently in the queue. If
Cancel is selected the power off option will be cancelled, the device will be available for use and
any jobs currently in the queue will be retained.
The device will begin a controlled power down sequence. It remains on for approximately 36
seconds before switching off.

Xerox WorkCentre 5945 Specifications

General

Print Technology	Laser
Print Speed	Up to 45 ppm
Maximum Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Maximum Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Copy Speed	Up to 45 cpm
Copy Resolution	600 x 600 dpi
Processor	1.2 GHz Dual-core
Memory	2 GB
Fax	Optional
Fax Transmission Speed	33.6 Kbps
Maximum Paper Size	A3
Connectivity	USB, Ethernet
Paper Size	A4, A5
PDL	PCL6, PDF, XPS, TIFF, JPEG
Mobile Printing	Apple AirPrint
Dimensions	640 x 700 x 1140 mm
Scanner Type	ADF, Flatbed
Weight	Approx. 172.0 lb / 78 kg