User Guide 563
Internet Services
Using Internet Services
Internet Services uses the embedded web server on the device. This allows you to communicate
with the device over the internet or intranet through your web browser.
1. At your computer, open your web browser.
2. In the URL field, use your keyboard to enter http:// followed by the IP Address of the device. For
example: If the IP Address is 192.168.100.100, enter http://192.168.100.100.
Note: To find out the IP Address of your device, print a configuration report or ask your System
Administrator.
3. Press the Enter button on your keyboard to load the page.
4. The Internet Services Welcome Page displays.
More Information
Cloning Device Settings using Internet Services
Printing the Information Pages from the Machine Status Menu
Using Internet Services to find System Administrator Contact Details
Choosing Not to Show the Internet Services Welcome Page Again
Tab menu
Status
Welcome
Cloning Device Settings using Internet Services
Internet Services uses the embedded web server on the device. This allows you to communicate
with the device over the internet or intranet through your web browser.
Use the Cloning option to save your current device settings to a file. This file can be used as a
backup and restore file for your device. You can also use a clone file to copy your device settings to
other devices. Cloning is a convenient tool to use if you have multiple devices to install with the
same configuration. Each device must have the same system software version to support the
cloning feature.
Note: This feature is for System Administrator use only.
Refer to the System Administrator Guide for further information.
More Information
Using Internet Services to find System Administrator Contact Details
System Administrator Guide www.xerox.com/support.
9
To Next Page
Loading...
Need help?
General
