Xerox WorkCentre 5945 User Manual

Paper and Media WorkCentre
®
5945/5955
648 User Guide
The tray is located on the front of the device and feeds the majority of media sizes. Media can be
loaded Long Edge Feed (LEF) or Short Edge Feed (SEF). Your device uses a system of programable
settings to manage the trays and media. These settings are established by your System
Administrator who can set the tray to Fully Adjustable or Dedicated.
• Fully Adjustable if this option is set, the paper settings screen is displayed each time the tray
is opened and closed. Use the dropdown menus to change the size, type and color of the media
loaded. The guides automatically detect the size of media loaded and the device gives a
warning if the guides are not set correctly or a non-standard media size is used.
• Dedicated when a tray is opened a screen is displayed identifying the media that should be
loaded in the tray. If the wrong size of media is loaded, or the tray guides are set incorrectly,
the device gives a warning to adjust the guides.
Note: Only the System Administrator can change the media attributes for a dedicated tray.
If the tray is set as a Dedicated tray, the media requested must be loaded in the tray and the
settings cannot be adjusted.
The tray can feed a range of media weights and types.
• The tray holds up to 500 sheets of 75 gsm (20 lb) paper.
• The media weight range is from 60 (16 lb) to 200 gsm (53 lb).
• The following media size range can be fed from the tray. From A5 LEF (5.5 x 8.5” LEF) to A3 SEF
(11 x 17” SEF). Custom sizes are also supported.
It is important to select the correct Type for the media loaded in the tray. The device can detect
different types of media as each page travels through the paper path and will halt a job if a
mismatch occurs.
Only use the types of media specified for use in the tray.
•Plain
•Bond
•Recycled
•Punched
• Letterhead and Pre-printed
•Cardstock
• Up to 200 gsm (53 lb).
!
Caution
A problem will occur if a tray is opened while it is being used to feed media.
!
Caution
Do not open Tray 1 if Tray 2 is open.
1. Open the tray.
2. Place the media in the tray. Media must be positioned against the right side of the tray.

Xerox WorkCentre 5945 Specifications

General

Print Technology	Laser
Print Speed	Up to 45 ppm
Maximum Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Maximum Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Copy Speed	Up to 45 cpm
Copy Resolution	600 x 600 dpi
Processor	1.2 GHz Dual-core
Memory	2 GB
Fax	Optional
Fax Transmission Speed	33.6 Kbps
Maximum Paper Size	A3
Connectivity	USB, Ethernet
Paper Size	A4, A5
PDL	PCL6, PDF, XPS, TIFF, JPEG
Mobile Printing	Apple AirPrint
Dimensions	640 x 700 x 1140 mm
Scanner Type	ADF, Flatbed
Weight	Approx. 172.0 lb / 78 kg