Xerox WorkCentre 5945 User Manual

Paper and Media WorkCentre
®
5945/5955
654 User Guide
Only use the types of media specified for use in the tray.
•Plain
•Bond
•Recycled
•Carbonless
•Punched
• Letterhead and Pre-printed
•Cardstock
• Up to 200 gsm (53 lb).
•Labels
• Transparencies (paper backed and non paper backed)
• Envelopes
Note: Labels can only be printed 1-sided.
1. Make sure the tray is in the down position. For larger media, use the tray extension.
2. Place the media in the tray. Media must be positioned against the right side of the tray.
Paper must not be loaded above the maximum fill line.
3. Place the media in the tray.
• Media must be positioned in the center of the tray against both the left and right side
guides.
• Paper must not be loaded above the maximum fill line.
- Load LEF pre-printed paper face-up and with the top towards the front of the device.
- Load SEF pre-printed paper face-up and with the top towards the main body of the
device.
- Load LEF and SEF labels face-down.
- Load LEF hole punched paper with the holes towards the main body of the device if
the holes are along the longest edge of the paper. If the holes are along the shortest
edge of the paper load it with the holes towards the back of the device.
- Load SEF hole punched paper with the holes towards the top of the device if the holes
are along the longest edge of the paper. If the holes are along the shortest edge of the
paper load it with the holes towards the main body of the device.
- Load transparencies face-down.
- If the transparencies have a white strip load them with the white strip on the right.
- Load SEF envelopes face down with flap closed. If the top edge of the envelope is the
longest edge load it with the top edge towards the back of the device. If the top edge
is the shortest edge, load it with the top edge towards the main body of the device.
4. Make sure that the paper guides just touch the paper.
The tray detects the position of the side guides to determine the size of the media.
5. The paper tray settings will be displayed on the screen. If the settings are correct select the
Confirm button. If the settings are not correct change the settings as required.

Xerox WorkCentre 5945 Specifications

General

Print Technology	Laser
Print Speed	Up to 45 ppm
Maximum Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Maximum Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Copy Speed	Up to 45 cpm
Copy Resolution	600 x 600 dpi
Processor	1.2 GHz Dual-core
Memory	2 GB
Fax	Optional
Fax Transmission Speed	33.6 Kbps
Maximum Paper Size	A3
Connectivity	USB, Ethernet
Paper Size	A4, A5
PDL	PCL6, PDF, XPS, TIFF, JPEG
Mobile Printing	Apple AirPrint
Dimensions	640 x 700 x 1140 mm
Scanner Type	ADF, Flatbed
Weight	Approx. 172.0 lb / 78 kg