4. Safe Driving
1
2
3
4
5
6
7
8
9
10
11
101
Electronic Parking Brake System (EPB)
Pull On/O Parking BrakePull On/O Parking Brake
─
On: When the vehicle is stationary, lift up the EPB switch or
shift into gear P, the indicator light on the dashboard
will come on, indicating that the EPB is successfully on.
─
Off: When the vehicle is stationary, press the brake
pedal and press the EPB switch, the indicator light
on the dashboard will go out, indicating that the EPB is
successfully o. The EPB cannot be turned o by pressing
the EPB switch when the vehicle is in gear P.
Note
●
The system will make a running voice when the EPB is
pulled on/o, which is a normal phenomenon.
●
After the EPB is on, if the vehicle cannot be powered
on and the EPB cannot be pulled off due to a
dead 12V battery, try to pull off it by jumper power
connection or contact your local authorized service
center.
Caution
●
If the parking brake cannot be pulled on/o manually,
contact the XPENG service center for troubleshooting
as soon as possible.
●
Do not drive the vehicle without releasing the parking
brake, otherwise it can easily damage the electronic
parking brake system.
To Next Page
Loading...
Need help?
General
