9. Maintenance
207
Refill of Windshield Washer Fluid
Check the washer fluid regularly and add washer fluid to the
reservoir in time if the level of washing liquid is found to be
too low.
Regularly check the system, and check whether nozzles are
clogged and whether the jetting is working properly.
Refill of Windshield Washer Fluid
1. Clean the reservoir cap first to prevent dust from entering
the reservoir.
2. Open the fluid reservoir.
3. Fill with washer fluid until you see the level almost
reaches the fill port.
Warning
●
Do not allow windscreen washer fluid to spill onto the
body panels. The spill should be wiped immediately
and the spill area washed with water.
●
For temperatures below 4°C, use a washer fluid
containing antifreeze. Avoiding fail to spray washer
fluid because of freezing.
To Next Page
Loading...
