XPENG P7 User Manual

9. Maintenance
206
Refill of Brake LiquidRefill of Brake Liquid
1. Wrap a flat screw driver in a cloth and pry o the reservoir
upper trim panel.
2. Clean the reservoir cap first to prevent dust from entering.
3. Unscrew and remove the reservoir cap.
4. Fill with brake fluid approved by XPENG Motors until the
brake fluid approaches the maximum (MAX) mark.
Warning
●
Use only new brake fluid contained in a gas-tight
closed bottle. Do not use brake fluid that has been
used or in an open container. Brake fluid can absorb
moisture and reduce braking performance.
●
Brake fluid is highly toxic. Containers must be
kept sealed and out of reach of children. In case
of accidental ingestion, seek immediate medical
attention.
●
Brake fluid can damage painted surfaces. Absorb
brake fluid spills immediately with an absorbent cloth
and wash with a cleaner-water mixture.

XPENG P7 Specifications

General

Brand	XPENG
Model	P7
Category	Automobile
Language	English