XPENG P7 User Manual

6. XPILOT Driving
1
2
3
4
5
6
7
8
9
10
11
121
Blind Spot Security
Blind Spot Security contains two active safety assist functions,
i.e. Blind Spot Detection (BSD) and Lane Change Alert (LCA),
which are designed to warn the driver about another vehicle
diagonally behind and to the side of the vehicle, thus providing
assistance in multi-lane co-directional trac conditions.
BSD provides warnings to the driver about vehicles in the blind
spot, while LCA provides warnings to the driver about fast
approaching vehicles in the immediate left and right lanes.
Schematic of Detection AreasSchematic of Detection Areas
Warning MessageWarning Message
When Blind Spot Security is in the warning state, the driver
shall avoid making lane changes, and if the driver turns on the
turn signal indicator on the warning side at this time, the blind
zone warning light of exterior rear-view mirror on that side will
flash to send warning signal.

XPENG P7 Specifications

General

Brand	XPENG
Model	P7
Category	Automobile
Language	English