XPENG P7 User Manual

3. Comfort Driving
1
2
3
4
5
6
7
8
9
10
11
71
Energy Regeneration
The energy regeneration is a strategy intended to have the
motor brake to regenerate electrical energy when the vehicle
is coasting or braking and then charge the traction battery,
thereby increasing the range.
Energy Regeneration When CoastingEnergy Regeneration When Coasting
With the accelerator pedal and brake pedal released, the
vehicle can regenerate energy during coasting.
Energy Regeneration When BrakingEnergy Regeneration When Braking
Depress the brake pedal to regenerate energy during braking.
Factors Aecting Energy Regeneration Factors Aecting Energy Regeneration
BrakeBrake
The amount of energy fed back to the traction battery through
energy regeneration brake depends on the following factors:
1. Current status of the traction battery:
─
The traction battery is fully charged.
─
The traction battery has a relatively high temperature.
─
The traction battery has a relatively low temperature.
2. Energy regeneration setting:
─
Click "Vehicle Control
→
Quick Controls
→
Power
Regeneration" on the CID to select the energy
regeneration level by "LOW" or "HIGH" button.
─
Then the energy regeneration brake will adjust the
amount of energy regenerated according to the set level.
Note
●
If the energy regeneration brake significantly reduces
driving speed (e.g., when driving on a steep slope),
the brake light will come on to remind the driver
behind that you are slowing down.
Caution
●
The deceleration realized by energy regeneration
brake cannot replace the braking required for safety,
and the driver shall apply the brake in time according
to the actual situation.

XPENG P7 Specifications

General

Brand	XPENG
Model	P7
Category	Automobile
Language	English