2. Preparations Before Driving (Exterior)
34
Roof Rack Mounting Hole
The roof rack interface can be used to install optional roof
rack. If using a roof rack, follow the instructions and safety
warnings provided in this section and the instruction manual
of the roof rack.
●
Make sure the roof rack is securely mounted.
●
To properly load dierent types of cargo (e.g. skis, bikes),
please use the appropriate accessories. Ensure that
the accessories are installed correctly and securely in
accordance with their instruction manuals. Do not load
cargo directly onto the top sheet metal, or the cargo will
damage the top sheet metal.
●
The total weight of the roof rack and cargo must not
exceed the rated load of the roof (50 kg). In addition,
the gross weight of the fully loaded vehicle, including
driver, passengers, cargo and roof load, shall not exceed
the maximum gross vehicle mass listed in the “Vehicle
Specifications” section of this manual.
●
When loading cargo on the roof, place the heaviest
items underneath and distribute the cargo as evenly as
possible.
●
Do not carry oversized items that may hang onto the
bumper or the side of the vehicle and obstruct the view.
●
Attach the front and rear ends of long items (e.g., board,
and surfboard) to the front and rear of the vehicle. Protect
the paintwork of the vehicle from being scratched by the
rope pulled down.
●
Check the roof rack regularly to ensure it is securely
mounted without any damage.
●
For the vehicle equipped with a roof rack interface, ensure
that the interface is covered with a lid when unused.
To Next Page
Loading...
Need help?
General
