EasyManua.ls Logo

XPENG P7 - Check Brake Fluid

XPENG P7
229 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9. Maintenance
204
Interior Cleaning PrecautionsInterior Cleaning Precautions
Caution
To avoid interfering with the pedals, make sure the
driver's foot mat is properly secured. Do not stack
other foot mats on top of it. Foot mats should always
be placed on the carpeted surface of the vehicle.
The use of solvents (including alcohol), bleach,
citrus cleaners, naphtha, silicone-based products, or
additives can damage the interior.
Static charged substances can cause damage to the
CID and dashboard.
If you notice any damage to the airbags or seat belts,
contact your local authorized service center as soon
as possible.
Do not allow any water, cleaning agents, or fabrics to
enter the safety belt unit.
Coolant Level Check
The cooling system is filled with coolant when the vehicle
leaves the factory and the coolant level should be checked
during the specified maintenance period.
Check the level markings on the side of the coolant reservoir:
MAX: Upper limit marker
MIN: Lower limit marker
The coolant level should be between the MIN mark and the
MAX mark, if it is below the MIN mark, add XPENG Motors
approved coolant promptly.
Refill the coolantRefill the coolant
1. Remove the upper trim panel of the front trunk.
2. Unscrew the reservoir cap and fill it with coolant.
To maximize the performance and life of the traction
battery, motor, and heating system, a specific type
of coolant should be chosen accordingly (with
different freezing points depending on the lowest
temperature in the location).

Table of Contents

Related product manuals