To Next Page

To Previous Page

6. XPILOT Driving

133

Intelligent Parking out Assist

After the Intelligent Parking Assist has finished parking,

Intelligent Parking out Assist can be used after restarting the

vehicle as long as the vehicle has not been moved. Just shift

the vehicle into R or tap at the side of the CID to enable it.

1. Observe the area in front of the vehicle for suitability and

safety.

2. After confirming the safety condition, keep the brake

pedal applied, put it into R gear and tap the "Start"

button on the Intelligent Parking Assist interface.

3. The vehicle will start to exit the parking space. The driver

needs to keep observing the surroundings to make sure

the process is safe.

4. "Departed from the Parking Spot" will be displayed on the

CID after exiting the parking spot.

Note

●

During Intelligent Parking Out, when the brake pedal

or accelerator pedal applied, Intelligent Parking Assist

spot departure will be suspended, and when tapping

the "Continue" button to resume.

Cancellation operations, warnings and restrictions applied to

Intelligent Parking Assist are also applied to Intelligent Parking

Assist Spot Departure function, see Warnings and Restrictions

for Intelligent Parking Assist (Refer to Page 131.

XPENG P7 User Manual

Questions and Answers: