3. Comfort Driving
68
Gearshift
Press the brake pedal and flick the shift lever up or down.
When the gear indicator comes on, it indicates the gear has
been shifted successfully.
GearsGears
The vehicle is equipped with the following gears:
─
R: Reverse gear
─
N: Neutral gear
─
D: Drive gear
─
P: Park gear
R: Reverse gearR: Reverse gear
When the vehicle is in an idle state, step on the brake pedal while
pushing up the shift lever. Then the indicator of Gear 'R' on the
dashboard will come on, and the gear will be shifted to R.
N: Neutral gearN: Neutral gear
The vehicle gear can be shifted to N through the following
operations, with the gear "N" indicator highlighted on the
dashboard:
─
With the gear in D, push the shift lever up by 1 gear.
─
With the gear in R, push the shift lever down by 1 gear.
─
With the gear in P, press the brake pedal and push the
shift lever up or down by 1 gear.
Neutral Gear Two-Step ConfirmNeutral Gear Two-Step Confirm
With the gear in D or R and vehicle speed ≥ 0 km/h, operate
to enter (or falsely trigger) N gear, a prompt showing "There
is a driving risk to shift to N gear in the driving state, confirm
shift?" will be popped up on the dashboard. You need to press
the confirmation button on the left side of the steering wheel
within 5 s to shift to N gear. If there is no operation after 5 s,
the prompt on the dashboard will disappear, and the gear will
not shift to N.
─
Click "Vehicle Control
→
Vehicle Settings
→
Steering
Wheel
→
N-Gear Two-Step Confirm" on the CID to
activate/deactivate this function.