6. XPILOT Driving
146
After a turning light is on and ALC is activated, the vehicle will
enter the pending lane change mode, and the LCD screen of
the dashboard will display the information as follows:
When you turn o or turn on the turning light in the reverse
direction before the vehicle crosses the boundary of the
current lane, the lane change will be canceled. At this time,
the LCD screen of the dashboard will display the following:
If ALC judges that the current driving environment is
inappropriate for a lane change, the dashboard will display
the prompt as follows:
Warning
●
ALC is only a driving assist function and cannot
achieve fully autonomous driving. The driver
still needs to always observe the lane change
environment and hold the steering wheel when ALC
is activated, and take over the vehicle before any
potential danger occurs.
●
ALC is not suitable for all traffic, weather, and road
conditions. Do not enable ALC in adverse weather (e.g.
rain, snow, fog), or on roads where pedestrians or
cyclists may pass through.
To Next Page
Loading...
