1. Notice to XPENG Owners
16
AC DischargingAC Discharging
AC discharging allows the power stored in the battery to be
output at 220 V for external appliances to use.
Perform AC discharging as follows:
1. Open the AC charging port lid.
2. Connect the appliance to the adapter first, then plug the
adapter into the charging port.
►
This function allows to connect external electrical
appliances with the maximum power of 2.2 kW.
►
When the traction state of charge is less than 20%,
this function will be automatically deactivated.
3. Tap the icon in the CID status bar to enter the
discharge function panel.
4. Confirm that the power supply circuit and electrical
appliance are well connected, and tap the "Start Power
Supply" button to enter the discharging mode; the
current and voltage will be displayed in real time during
discharging; you can stop discharging at any time.
─
You can custom the power supply limit, so that the
discharging will automatically stop when the limit is
reached.
Warning
●
It is strictly forbidden to use this function in case of
any damage of the appliance or the adapter.
●
It is strictly forbidden to allow minors to touch or
use the charging device. Keep minors away from the
vehicle when this function is enabled.
●
In case of abnormal discharging, please disable this
function immediately.
●
It is strictly prohibited to touch the plug pins of
electrical appliances and adapter jacks.
●
It is strictly prohibited to connect counterfeit products,
medical or health electronic devices to the vehicle.
https://www.automotive-manuals.net
To Next Page
Loading...
