1
2
3
4
5
6
7
8
9
10
11
61
2. Preparations Before Driving (Interior)
High BeamHigh Beam
─
With the low beam on, flip the combination switch
forward/backward High beam to turn on/off the high
beam;
─
Continuously flip the switch backward and release it, the
high beam will flash to alert the preceding vehicle or give
a sign.
Caution
●
High beam can dazzle the driver of oncoming car, so
please use it properly.
Turning Lamp Turning Lamp
─
Flip the combination switch down or up to turn on the
turn signal lights. Then the corresponding or
indicator light on the dashboard will flash with "da-da"
sound.
─
Flip the combination switch back to the center position or
turn the steering wheel back to turn o the turning lamps.
Lane Change FlashingLane Change Flashing
To indicate a lane change, quickly flip the combination switch
up or down and release it. Then the corresponding turn signal
light will flash 3 times.
To Next Page
Loading...
