XPENG P7 User Manual

64
2. Preparations Before Driving (Interior)
After the vehicle is powered on, flip the washer switch to
select:
─
: Washing with water.
─
OFF: Turn o washing.
►
The washer switch will automatically return to the
default position when released.
─
MIST: Wiping with mist.
Intermittent wipingIntermittent wiping
─
Turn the wiper switch to the "INT" position to activate
intermittent wiping.
►
The intermittent low speed wiping time can be set
via "Vehicle Control
→
Vehicle Settings
→
Wipers
→
Wiper INT Speed" on CID.
Continuous Low-Speed WipingContinuous Low-Speed Wiping
─
Turn the wiper switch to the "LO" position to activate
continuous low-speed wiping.
Continuous High-Speed WipingContinuous High-Speed Wiping
─
Turn the wiper switch to the "HI" position to activate the
continuous high-speed wiping.
Washing with WaterWashing with Water
─
Flip the washer switch to the " " position, and the
washers will start spraying water.
►
With the wiper switch at "OFF or INT" position, flip
the washer switch continuously for a period of time.
Then the wipers will start working at a low speed
and stop after 3 strokes.

XPENG P7 Specifications

General

Brand	XPENG
Model	P7
Category	Automobile
Language	English