3. Comfort Driving
88
3. Wrap the tether around the inner headrest position, open
the trim lids of the anchor points, attach the hook and
loop to the anchor points and tighten the tether.
Checking the Child Safety SeatChecking the Child Safety Seat
After installing the child safety seat, check the seat for
looseness:
1. Secure the child safety seat by the seat belt path and try
to slide the seat from side to side, and from front to back.
2. If the seat can move more than 2.5 cm, indicating that it is
too loose, fasten the seat belt or reconnect the seat.
3. If you cannot fasten the seat, try another seat position or
replace the seat.
Warning
●
Even if a child safety seat or raised seat is used, do
not allow the child to sit in the front passenger seat
and never place a rear-facing child safety seat in a
seat with an activated airbag, or it will pose a serious
risk of injury or death.
●
Never use a forward-facing child safety seat until the
child weighs more than 9 kg and can sit in the vehicle
independently. Children under two years of age do
not have a fully developed spine and neck and should
avoid frontal impact injuries.
To Next Page
Loading...
Need help?
General
