Yamaha DSP-A2 Owner's Manual

3
English
7 Channel Power Amplification
Main: 100W + 100W (8Ω) RMS Output
Power, 0.02% THD, 20–20,000 Hz
Center: 100W (8Ω) RMS Output Power,
0.02% THD, 20–20,000 Hz
Rear: 100W + 100W (8Ω) RMS Output
Power, 0.02% THD, 20–20,000 Hz
Front effect:
25W + 25W (8Ω) RMS Output
Power, 0.05% THD, 1 kHz
Multi-Mode Digital Sound Field
Processing
●
Digital Sound Field Processor (DSP)
●
Dolby Digital Decoder
●
Dolby Pro Logic Surround Decoder
●
DTS Decoder
●
CINEMA DSP: Theater-like Sound
Experience by the Combination of
YAMAHA DSP Technology and Dolby
Digital, Dolby Pro Logic or DTS
●
Automatic Input Balance Control for
Dolby Pro Logic Surround
●
Test Tone Generator for Easier Speaker
Balance Adjustment
●
Speaker Output Mode Selection
Capability for the Most Suitable Use of
Your Speaker System
Others
●
“SET MENU” Mode which Provides You
with 8 Titles of Setting Changes and
Adjustments for Optimizing this Unit for
Your Audio/Video System
● BASS EXTENSION Button for Reinforcing
Bass Response
● On Screen Display Function Helpful in
Controlling This Unit
●
REC OUT Selector which is Independent of
Input Source Selection
● SLEEP Timer
●
OPTICAL and COAXIAL Digital Audio
Signal Terminals
●
6 Channel External Decoder Input for Other
Future Formats
● Video Signal Input/Output Capability
(Including S Video Connections)
●
Multi-Functional
remote controller
with
“Learning” Capability
Features
INTRODUCTION

Yamaha DSP-A2 Specifications

General

Frequency Response	20Hz - 20kHz
Total Harmonic Distortion	0.015%
Type	AV Amplifier
Input Sensitivity	200 mV (Line)
Channel Separation	60 dB
Speaker Load Impedance	4-16 ohms
Video Connections	Composite, S-Video
Surround Sound Formats	Dolby Digital, DTS
Signal-to-Noise Ratio	100 dB
Dimensions	435 x 171 x 476 mm
Damping Factor	80 (8 ohms, 1kHz)
Digital Inputs	2 Coaxial
DSP Modes	Cinema DSP
Inputs	Phono
Outputs	Speaker Outputs