Startup Procedure and Test Run
3
3.2 Overview of Keypad Components and Functions
YASKAWA TOEPYAIGA5002A GA500 Programming 465
■ Use the LO/RE Selection Key on the Keypad to Switch between LOCAL and REMOTE
Each time you push , the mode switches between LOCAL and REMOTE. The LED illuminates in LOCAL
Mode.
Figure 3.9 Use the LO/RE Selection Key to Switch between LOCAL and REMOTE
■ Use MFDI Terminals (S1 to S7) to Switch between LOCAL and REMOTE
When you set H1-xx = 1 [MFDI Function Selection = LOCAL/REMOTE Selection], you can activate/deactivate the
terminal to switch between LOCAL and REMOTE. Set H1-xx = 1 to disable the LO/RE key on the keypad. For
information about the MFDI functions, refer to the list in H1: Digital Inputs on page 287.
To Next Page
Loading...
