Customizing Your Phone
25
l If you select WPA-PSK, WPA2-PSK, WPA-EAP or WPA2-EAP from the Security Mode field, select the desired
cipher type first and enter the desired values in the corresponding fields.
4. Tap Save.
The connected wireless networks will be saved to Known Network(s) list.
Related Topic
Activating the Wi-Fi Mode
Disconnecting the Wireless Network Connection
Procedure
1. Navigate to Menu->Settings->Basic Settings->Wi-Fi.
2. Highlight the X Available Network(s) (X represents the number of available networks), and then press Enter.
3. Highlight the connected wireless network, and then tap Disconnect.
You can also disconnect the wireless network when deactivating the Wi-Fi mode.
Related Topic
Deactivating the Wi-Fi Mode
Connecting a Mobile Phone Using Bluetooth
The IP phone supports Bluetooth. Bluetooth enables low-bandwidth wireless connections within a range of 10 meters
(32 feet). The best performance is in the 1 to 2 meters (3 to 6 feet) range.
You can pair and connect the Bluetooth-Enabled mobile phone with your IP phone. After connection, you can do the
following:
l Make and receive mobile calls on the IP phone
l Use the IP phone as a Bluetooth speaker for music played on your mobile phone.
l Merge the calls on your IP phones, the PSTN and connected mobile phone into to a hybrid UC conference (refer to
Creating a Hybrid UC Meeting).
Note
Not all mobile phones support this function. Contact your system administrator for more information.
Topics
Activating the Bluetooth Mode
Deactivating the Bluetooth Mode
Pairing and Connecting the Bluetooth-enabled Mobile Phone
Syncing the Mobile Contacts to the IP Phone
Configuring the Phone Audio Feature
Configuring the Phone Media Feature
Handling a Mobile Phone Call on the IP phone
Editing Device Name of your Phone for Recognition
Making the IP Phone Discoverable
Deleting the Paired Bluetooth Device
Disconnecting the Bluetooth Device
To Next Page
Loading...
