Yealink CP920 - Messages; Voice Mail; Setting the Voice Mail Code; Receiving a Voice Message

Yealink CP920 User Guide
78
If your phone is set to answer intercom calls with your microphone muted, you need to tap the Mute touch key to
unmute your microphone before responding to the call.
Messages
You can send and receive voice messages.
Note
These features may not be available on all servers. Contact your system administrator for more information.
Topics
Voice Mail
Voice Mail
Voice Mail feature allows you to leave voice mails for someone or listen to your voice mail messages on your IP
phones. This feature is set up on the server side and not all servers support this feature.
Topics
Setting the Voice Mail Code
Receiving a Voice Message
Leaving Voice Mails
Listening to Voice Mails
Setting the Voice Mail Code
If you want to connect your phone to the message center, you need to set the voice mail code on your phone.
Before You Begin
Get the voice mail code from your system administrator.
Procedure
1. Navigate to Menu->Message->Voice Mail->Set Voice Mail Code.
2. Enter the voice mail code (for example, *4) in the desired account field.
3. Tap Save.
Receiving a Voice Message
When receiving a new voice mail, the phone plays a warning tone. A message of “n New Voice Mail(s)” (“n” indicates
the number of unread voice messages) is displayed on the phone screen.