Call Features
61
Performing a Semi-Attended/Attended Transfer
Joining an Incoming Call to a Conference
You can create a conference when the phone receives an incoming call during the call(s) or a conference.
Procedure
1. Tap Join when the phone receives a new call.
The conference among the original call(s) and the incoming call is set up. If you are in a conference, the new party
will join to the conference.
Creating a Hybrid UC Meeting
You can merge the calls on your IP phones, the PSTN and connected mobile phone into a hybrid UC meeting.
Procedure
There are many ways to create a hybrid UC meeting, the following shows an example.
1. Make sure you have connected a mobile phone to your IP phone.
2. Make sure you have an active PSTN account.
3. Do the following to place a mobile call over Bluetooth on the IP phone.
l Tap .
Tap Switch to choose the Mobile Account.
Enter the desired number.
Tap or Send.
4. Place a SIP call.
5. Place a PSTN call.
6. Tap Conf.
The hybrid UC conference is created.
Related Topics
Pairing and Connecting the Bluetooth-enabled Mobile Phone
Configuring the PSTN Account
Holding or Resuming a Conference Call
When you place a conference call on hold, other participants are placed on hold. Other participants cannot hear each
other until you resume the held conference call.
Procedure
To Next Page
Loading...
