Yealink CP920 - Answering an Intercom Call; Setting Intercom

Advanced Features
77
Answering an Intercom Call
By default, when there is an incoming intercom call, the phone plays a warning tone and this incoming call will be
answered automatically. You can configure the behavior when receiving an intercom call.
Topics
Setting Intercom
Answering an Intercom Call
Setting Intercom
You can configure the following behavior when receiving an intercom call.
Intercom Allow
Intercom Allow feature allows the IP phones to automatically answer an incoming intercom call. If you disable this fea-
ture, the IP phone will handle an incoming intercom call like a normal incoming call. Intercom Allow feature is enabled
by default.
Note
Your system administrator can set a period of delay time before the phone automatically answers intercom calls.
Intercom Mute
Intercom Mute feature allows the IP phones to mute the microphone when incoming intercom calls are answered auto-
matically. Intercom Mute is disabled by default.
Intercom Tone
Intercom Tone feature allows the IP phones to play a warning tone before answering an intercom call automatically.
Intercom Tone is enabled by default.
Intercom Barge
Intercom Barge allows the IP phones to automatically answer an incoming intercom call while an active call is in pro-
gress. The active call will be placed on hold. If you disable this feature, the IP phone will handle an incoming intercom
call like a normal incoming call while there is already an active call on the IP phone. Intercom Barge is disabled by
default.
Note
To enable the phone to receive a new incoming call when it already has an active call, make sure that the call waiting feature
is enabled on the phone in advance.
Procedure
1. Navigate to Menu->Features->Intercom.
2. Make the desired changes.
3. Tap Save.
Related Topic
Enabling Call Waiting
Answering an Intercom Call
By default, the intercom call is automatically answered on your phone.