Yealink CP920 - Resuming a Held Call; Swapping between Active and Held Calls; Do Not Disturb (DND); Activating DND

Yealink CP920 User Guide
56
1. Tap Hold during a call.
The phone screen indicates that the call is on hold.
The phone will beep softly every 30 seconds to remind you that you still have a call on hold.
Resuming a Held Call
Procedure
1. Tap Resume.
If multiple calls are placed on hold, select the desired call first.
Swapping Between Active and Held Calls
You can easily switch between active and held calls.
Procedure
1. Tap the up or down navigation key.
Do Not Disturb (DND)
DND enables your phone to reject all incoming calls automatically when you do not want to be interrupted.
Note
Check with your system administrator to find out if the DND feature is available on your phone.
Topics
Activating DND
After activating DND, the phone will reject all incoming calls automatically.
Note
If both DND and busy forward are activated on the phone, calls will be forwarded to the configured destination number.
Procedure
1. Tap DND when the phone is idle.
The DND icon appears in the status bar.